The Martin Audio WLX is a high performance subwoofer featuring our trademark horn loading expertise. A derivative of the WSX, the WLX is smaller, lighter, can be flown or ground stacked with W8 line array systems and possesses high output capability with low frequency extension.
A single ultra-long excursion 18" (460mm)/ 4" (100mm) coil driver is front loaded by a hyperbolic horn with low flare rate. The rear of the driver is reflex loaded to extend the LF output to below the natural cut-off point of the horn. This Hybrid technique marries the very high efficiency of horn loading with the extended low frequency response of a reflex enclosure.
FEATURES
- Hybrid folded horn/reflex loaded subwoofer system
- Single 18" ultra-long excursion high power bass driver
- Sensitivity 106dB 1W@1M
- Maximum SPL 141dB peak
- Frequency response 35Hz-150Hz 3dB, -10dB @ 28Hz
- 8 ohm nominal impedance
- Fast, integral rigging system with variable splay angles
APPLICATIONS
- Dedicated flown sub-bass for use above W8LC or W8LM
- Flown sub-bass for use in adjacent column to W8L or W8LC
- Ground stacked sub-bass to augment low frequency output of all Martin
- Audio Wavefront products
- Fixed Installations
|
|
Click pic for larger image |
| |
TECHNICAL SPECIFICATIONS
TYPE |
Hybrid horn and reflex loaded subwoofer |
FREQUENCY RESPONSE (1) |
35Hz-150Hz 3dB -10dB @ 28 Hz |
DRIVERS |
18" (460mm)/4" (100mm) voice coil |
RATED POWER (2) |
1000W AES, 4000 peak |
SENSITIVITY (6,3) |
100dB (open space) 106dB (half space) |
MAXIMUM SPL (CALCULATED @ Im) |
130dB continuous, 136dB peak (open space) 136dB continuous, 142dB peak (half space) |
NOMINAL IMPEDANCE |
8 ohms |
CROSSOVER |
70Hz-150Hz active (via DX2 controller) |
ENCLOSURE |
Rectangular, multi-laminate birch ply |
FINISH |
Textured paint |
PROTECTIVE GRILLE |
Perforated steel |
CONNECTORS |
2 x Neutrik NL8 |
FITTINGS |
Proprietary rigging system Interlocking skids on sides and top & bottom 2 generously sized bar handles and an additional large pocket handle on each side |
DIMENSIONS (inc. wheelboard) |
(W) 1002mm x (H) 490mm x (D) 800mm (950mm) (W) 39.5ins x (H) 19.3ins x (D) 31.5ins (37.4ins) |
WEIGHT (ex. wheelboard) |
85kg (187lbs) | |
ACCESSORIES
|
W8LCGRIDASSEMBLY Flying Frame/Grid
PDF |
|
W8LCGRIDLIFTINGBAR Lifting Bar
PDF |
|
ASF20005 Connector Frame
PDF |
|
ASF20003 Connector Frame
PDF | |