left_title
Line Array
Power Amp
Mixing Console
Out Board
Microphone
Video
3D stereoscopic
Amx
Etc.
  회사소개 사업분야 제품소개 고객센터 견적의뢰 로고홈
> ǰҰ > martin audio
 
𵨸 WMX
Martin Audio
÷ 1 WMXdatasheet.pdf
÷ 2 WMX.dwg
 
 
 
WMX
Hybrid horn and reflex loaded subwoofer
TOURING & THEATRE

The Martin Audio WMX is a compact, high performance flown or ground stacked subwoofer featuring our trademark Hybrid loading. Primarily intended for use with the W8LM/W8LMD, it shares the same cabinet width and is directly compatible with the W8LM and its flying hardware.

A single long-excursion 18" (460mm)/ 4" (100mm) coil driver is front loaded by a hyperbolic horn with an ultra-low flare rate. The rear of the driver is reflex loaded to extend the LF output to below the natural cut-off point of the horn. This Hybrid technique marries the very high efficiency of horn loading with the extended low frequency response of a reflex enclosure.

FEATURES

  • Very high output compact Hybrid folded horn/reflex loaded
    subwoofer.
  • Single 18" (460mm) ultra-long excursion high power drive unit
  • Frequency response 35Hz-150Hz 3dB (-10dB @ 28Hz)
  • 104dB 1W/1m
  • Fast integral rigging system
  • Compatable with W8LM and W8LMD line array elements
  • Can be ground stacked or flown
  • Socket for pole mounted W8LMD

APPLICATIONS

  • Dedicated flown or groundstacked sub for use with W8LM and W8LMD
  • Ground stacked sub with any Martin Audio Wavefront products
  • Fixed installations
  • Live sound reinforcement
  • Corporate events
  • Theatre sound reinforcement

Click pic for larger image
TECHNICAL SPECIFICATIONS
TYPE Hybrid horn and reflex loaded subwoofer
FREQUENCY RESPONSE (1) 35Hz-150Hz 3dB
-10dB @ 28Hz
DRIVERS 18" (460mm)/ 4" (100mm) voice coil, ultra-long
excursion, water resistant cone
RATED POWER (2) 1000W AES, 4000W peak
SENSITIVITY (6,3) 98dB (open space)
104dB (half space)
MAXIMUM SPL (CALCULATED @ Im) 127dB continuous, 133dB peak (open space)
133dB continuous, 139dB peak (half space)
NOMINAL IMPEDANCE 8 ohms
CROSSOVER 70Hz-150Hz active low pass
(via DX1 controller)
ENCLOSURE Rectangular, multi-laminate birch ply
FINISH Textured paint
PROTECTIVE GRILLE Perforated steel
CONNECTORS 2 x Neutrik NL8
FITTINGS Proprietary rigging system
Interlocking skids on top & bottom
2 generously sized bar handles on each side
Mounting clips for optional lid
Top mounted top hat fitting
DIMENSIONS (inc. wheels) (W) 620mm x (H) 620mm x (D) 905mm
(1032mm)
(W) 24.4ins x (H) 24.4ins x (D) 35.6ins (40.4ins)
WEIGHT 87kg (191lbs)
ACCESSORIES

LID00004
Cabinet Lid