|
PN12 and PN15 PowerNet Reference Point Arrays (RPA’s) are self-contained, fully integrated, network-ready electro-acoustic systems. The network-ready PowerNet loudspeakers and R-Hang mounting hardware are fully assembled and tested before the array leaves our factory. At the job site, all you need to do is to put the array into place and plug in the signal and power cables. Then walk the room and enjoy flawless array performance.
RPA are built using unique 40° TRAP (TRue Array Principle) modules that combine seamlessly with their adjacent loudspeakers. System Specific Electronics are precisely adjusted for proper phase alignment, uniform response across the entire frequency range and long term reliability.
PN12 and PN15 RPA’s provide higher output and wider horizontal coverage than a single loudspeaker, yet are almost as easy to install.
.bmp) PN12/6-2(T).bmp) PN12/6-3(T).bmp) PN12/6-4(T).bmp) PN15/4-2(T).bmp) PN15/4-3(T).bmp) PN15/4-4(T)
MODEL
|
FREQ
(Hz) |
DISPERSION
(degrees) |
SPL RATING
(prog/peak) |
WxHxD
(inches/centimeters) |
WEIGHT
(lbs/kg) |
POWER/
SENSITIVITY |
|
PN12/6-2(T) |
55 to 18K |
80ºH by 60ºV |
128/131 db |
29x26,5x16,5/
73,7x67,3x41,9 |
144/65,3 |
115V AC
60Hz
or
230V AC
50/60Hz
1,4V Input
for
Rated
Power
Output |
| PN12/6-3(T) |
55 to 18K |
120ºH by 60ºV |
130/133 db |
39,25x26,5x17,5/
99,7x67,3x44,5 |
219/99,3 |
| PN12/6-4(T) |
55 to 18K |
160ºH by 60ºV |
131/134 db |
45,5x26,5x21,5/
115,6x67,3x54,6 |
292/132,5 |
| PN15/4-2(T) |
40 to 18K |
80ºH by 40ºV |
128/131 db |
35.5x29.5x21.5/
90.2x74.9x54.6 |
186/84,4 |
| PN15/4-3(T) |
40 to 18K |
120ºH by 40ºV |
130/133 db |
48x29,5x22,25/
121,9x74,9x56,5 |
284/128,8 |
| PN15/4-4(T) |
40 to 18K |
160ºH by 40ºV |
131/134 db |
55,5x29,5x26,75/
141x74,9x67,9 |
372/168,7 | |
> 제품소개 > renkus-heinz 
