| TECHNICAL DATA |
|
|
| General |
|
| Number of channels |
2 |
| Peak total output all channels driven |
13000 W |
| Peak output voltage per channel |
195 V |
| Max. output current per channel |
58 Arms |
| Max. Output Power |
2 ohms 4 ohms 8 ohms 16 ohms |
| Per ch. (all ch.’s driven) |
6500 W 4400 W 2350 W 1200 W |
| Bridged per ch. - 3) |
- 3) 13000 W 8800 W 4700 W |
| Performance with Gain: 35 dB and VPL: 101 V |
|
| THD 20 Hz - 20 kHz for 1 W |
<0.1% |
| THD at 1 kHz and 1 dB below clipping |
<0.05% |
| Signal To Noise Ratio |
>112 dBA |
| Channel separation (Crosstalk) at 1 kHz |
>70 dB |
| Frequency response (1 W into 8 ohms) +0/-3 dB |
6.8 Hz - 34 kHz |
| Input impedance |
20 kOhm |
| Input Common Mode Rejection, CMR |
54 dB |
| Output impedance @ 100 Hz |
19 mOhm |
| Output slew rate into 8 ohms |
20 V/microsecond |
| Voltage Peak Limiter (VPL), max. peak output |
|
| VPL, selectable per ch. |
195, 170, 140, 116, 100, 80, 66, 54 V |
| VPL, selectable when bridged |
390, 340, 280, 232, 200, 160, 132, 108 V |
| Voltage Peak Limiter mode (per ch.) |
Hard / Soft |
| Gain and Level |
|
Amplifier gain selectable (all channels) 1)
– rear-panel switches |
23, 26, 29, 32, 35, 38, 41, 44 dB |
| Default gain |
38 dB |
| Level adjustment (per ch.) |
Front-panel potentiometer, 21 position detented from -inf to 0 dB |
| Connectors and Switches |
|
| Input connectors (per ch.) |
3-pin XLR, electronically balanced |
| Output connectors (per ch.) |
Neutrik Speakon or Binding Posts (must be specified upon order) |
| Output bridge mode |
A+B - Ch. A is signal input soruce |
| NomadLink® network |
On board, 2 x RJ45 EtherCon connectors, IN and OUT |
|
Yes, depending on presence of output signal |
| Power on/off and Remote enable on/off |
Individual switches on front-panel |
| Cooling |
Two fans, front-to-rear airflow, temperature controlled speed |
| Front-panel indicators: |
|
| Common |
NomadLink® Network; Power Average Limiter (PAL) 2); Power on |
| Per channel |
Signal present
High-impedance; -20 dB, -15 dB, -10 dB and -4 dB output signal; Voltage Peak Limiter (VPL);
Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute |
| Power |
|
| Operating voltage, 230 V / 115 V nominal 4) |
130-265 V / 65-135 V |
| Minimum power-up voltage, 230 V / 115 V |
171 V / 85 V |
| Power Average Limiter (PAL) 2) |
Yes |
| Soft start / Inrush Current Draw |
Yes / max. 5 A |
| Mains connector |
230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock |
| Dimensions (W/H/D) |
W: 483 mm (19”), H: 88 mm (2 U), Overall D: 396 mm (15.6”), Mounting D: 358 mm (14.1”) |
| Weight |
12 kg (26.4 lbs.) |
| Finish |
Black painted steel chassis with black painted steel / aluminum front |
| Approvals |
CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC |
> 제품소개 > lab-gruppen 
